Author: Zhou, K.
Paper Title Page
MOP100 Design Upgrades of the Next Superconducting RF Gun for ELBE 326
 
  • J. Teichert, A. Arnold, S. Ma, P. Murcek, J. Schaber, H. Vennekate, R. Xiang, P.Z. Zwartek
    HZDR, Dresden, Germany
  • K. Zhou
    CAEP/IAE, Mianyang, Sichuan, People’s Republic of China
 
  Funding: Funding is provided by the China Scholarship Council.
At the ELBE user facility a superconducting RF photoinjector has been in operation since several years. The injector is routinely applied for THz radiation production in user beam experiments. For future applications higher bunch charges, shorter pulses and lower transverse emittances are required. Thus it is planned to replace this SRF gun by a next version with an RF cavity reaching a higher acceleration gradient. We also present improvements concerning the SC solenoid and the photocathode exchange system and report on the status of construction and testing of this SRF gun cryomodule.
 
poster icon Poster MOP100 [2.199 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP100  
About • paper received ※ 27 June 2019       paper accepted ※ 02 July 2019       issue date ※ 14 August 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP082 Geometry Dependent Beam Dynamics of a 3.5-cell SRF Gun Cavity at ELBE 1095
 
  • K. Zhou
    CAEP/IAE, Mianyang, Sichuan, People’s Republic of China
  • A. Arnold, S. Ma, J. Schaber, J. Teichert, R. Xiang
    HZDR, Dresden, Germany
 
  In order to optimize the next generation SRF gun at HZDR ELBE radiation source, the impact on beam dynamics from the SRF cavity geometry needs to be investigated. This paper presents an analysis on the electromagnetic fields and output electron beam qualities, by changing the geometry parameters of a 3.5-cell SRF gun cavity. The simulation results show the higher electric field ratio in the first half cell to the TESLA like cell, the better beam parameters we can obtain, which, however, will also lead to a higher Emax/E0 and Bmax/E0.  
poster icon Poster THP082 [1.935 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP082  
About • paper received ※ 22 June 2019       paper accepted ※ 01 July 2019       issue date ※ 14 August 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THP083 Quadrupole Scan Transverse Emittance Measurements at HZDR ELBE 1100
SUSP028   use link to see paper's listing under its alternate paper code  
 
  • S. Ma, A. Arnold, A.A. Ryzhov, J. Schaber, J. Teichert, R. Xiang, K. Zhou
    HZDR, Dresden, Germany
 
  Two quadrupoles and one screen are used for beam transverse emittance measurements at HZDR ELBE. In this paper, the emittance calculated with two different methods, one with thin-lens approximation and the other one without this approximation, are compared and analized. To analyze the measurement error, quadrupole calibration is need. Two aspects about quadrupole analysis are made. The first one is quadrupole’s effective length and strength and the second one is quadrupole’s converged or diverged ability in reality.  
poster icon Poster THP083 [1.726 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP083  
About • paper received ※ 25 June 2019       paper accepted ※ 03 July 2019       issue date ※ 14 August 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)